Ricoh MP5000

Symbol key:
C: Clean, R: Replace, L: Lubricate, I: Inspect

	EM	160K	320K	800K	Note
Paper Feed
By-pass Pick-up Roller	I	C			Water
By-pass Separation Roller	I	C			Water
Paper Feed Guides	I	C			Dry cloth
Relay Rollers	I	C			Water
Bottom Plate Pad	I	C			Water
Bottom Plate Pad (By-pass feed)	I	C			Water
Registration Sensor	I	C			Blower brush
By-pass Feed Roller Gear	I	L			Silicone Grease G-501
Relay Sensors	I	C			Blower Brush
Paper Feed Sensors	I	C			Blower Brush
Duplex Unit
Inverter Rollers		C			Water
Transport Rollers		C			Water
Entrance Sensor		C			Water
Exit Sensor		C			Water
Transfer Belt Unit
Transfer Belt	C	R			Dry cloth. To prevent damage to the cleaning blade, always replace these items together.
Transfer Belt Cleaning Blade		R
Transfer Belt Rollers		C			Dry cloth
Entrance Seal		C			Dry cloth
Transfer Entrance Guide	C	C			Dry cloth
Used Toner Tank	I	C			Empty the tank
Paper Exit
Paper Exit Sensor	I	I			Blower brush
Junction Gate Jam sensor	I	C			Blower brush
Fusing Exit Sensor	I	I			Blower brush
Paper Exit Rollers	I	I			Water
Junction Transport Roller	I	I			Water
Paper Exit Guide	I	I			Water

Due to their durability and extended service life, the feed rollers, separation rollers, and pick-up rollers of the mainframe, optional paper trays, and LCT are not replaced at PM.

*1: Lubricate the by-pass feed clutch gear with Silicone Grease G501 every P.M.

	EM	160K	320K	800K	Note
Fusing Unit and Paper Exit
Fusing Entrance and Exit Guide Plates		C			Water or alcohol
Hot Roller		R
Pressure Roller		R
Fusing Thermistors		R
Cleaning Roller Bushings		L			Grease: Barrierta JFE 55/2
Hot Roller Strippers			R
Paper Exit Guide Ribs		C			Water or alcohol
Web Supply Roller		R
Web Holder Roller			R
Brake Pad			R