Ricoh MP3500

The content of the NVRAM can be uploaded to and downloaded from an SD card.

UPLOADING NVRAM DATA (SP5-824)

1. Turn off the main switch.
2. Remove the SD card cover [A].
3. Insert the SD card [B] into SD card slot C3.
4. Turn on the main switch.
5. Execute SP5-824.
6. Press [1] to start uploading the NVRAM data.

DOWNLOADING NVRAM DATA (SP5-825)

The following data are not downloaded from the SD card:

• Total count categories (SP7-003-*** Copy Counter)
• C/O, P/O Counter (SP7-006-*** C/O, P/O Count Display)
• Dupelx, A3/DLT/Over 420 mm, Staple and Scanner application scanning counters (system settings).

1. Turn off the main switch.
2. Remove the SD card cover [A].
3. Plug the SD card [B] into SD card slot C3.
4. Turn on the main switch.
5. Execute SP5-825.
6. Press [1] to start downloading the NVRAM data.

Note that the following errors could occur during downloading:

• If a card is not installed in the card slot and a message tells you that downloading cannot proceed, you cannot execute downloading, even by pressing [1].
• If the correct card for the NVRAM data is not inserted in the card slot, after you press [1] a message will tell you that downloading cannot proceed because the card is abnormal and the execution will halt.