Ricoh MP2580
Maintenance. How to Reset the PM Counter
After preventive maintenance work, reset the PM counter (SP 7804-1) as follows.
Activate the SP mode
- Select SP 7804-1 (ResetāPM Counter).
- Press the OK key [A]. The message "Execute" shows.
- Press the button [B] below the message "Execute."
- The messages "Execute?" followed by "Cancel" and "Execute" show.
- To reset the PM counter, press the button [C] below the message "Execute."
- Wait until the message "Completed" shows.
- Quit the SP mode.