Ricoh MP2501SP
Adjustment after Replacement. Scanning
• Before doing the following scanner adjustments, perform or check the printing registration / side-to-side adjustment and the blank margin adjustment.
• Use an S5S test chart to perform the following adjustments.
Registration: Platen Mode
![](images/ts/035_m2700_005_01.jpg)
A: Leading edge registration (L-Edge Regist Adj)
B: Side-to-side registration (S-to-S Regist Adj)
1. Place the test chart on the exposure glass and make a copy from one of the feed stations.
2. Check the leading edge and side-to-side registration, and adjust them using the following SP modes if necessary.
SP No. | SP Name | Adjustment Range |
---|---|---|
SP4-010-001 | L-Edge Regist Adj | ±2.0 mm |
SP4-011-001 | S-to-S Regist Adj | ±2.0 mm |
• Use an S5S test chart to do the following adjustment.
A: Sub-scan Magnification
1. Place the test chart on the exposure glass and make a copy from one of the feed stations.
2. Check the magnification ratio and adjust using the following SP mode if necessary.
SP No. | SP Name | Adjustment Range |
---|---|---|
SP4-008-001 | Sub-scan Mag. Adj | ±1.0 % |