Ricoh M200 SPC252DN PE-MF4
Service Mode. SERVICE MODE (PRINTER MODELS) 2
Menu List
Engine Maintenance | ||
---|---|---|
Registration | Vert Bypass Tray |
Adjusts the vertical registration for the bypass tray. If the machine settings are reset to the factory defaults, this value does not change. [-15 to 15 / 0 (Default) / 1 mm/step] |
Horiz.Dup Back | Adjusts the horizontal registration for the back side in duplex mode. If the machine settings are reset to the factory defaults, this value does not change. [-15 to 15 / 0 (Default) / 1 mm/step] |
|
Vert.Dup Back | Adjusts the vertical registration for the back side in duplex mode. If the machine settings are reset to the factory defaults, this value does not change. [-15 to 15 / 0 (Default) / 1 mm/step] |
|
Counter Reset | Resets counters to factory defaults. | |
Clear log | Clears the error and the jam counter logs. | |
Reset Transfer | Resets the transfer unit life counter. | |
Reset Fuser | Resets the fusing unit life counter. | |
Reset 2nd | Resets the 2nd transfer unit (transfer roller) life counter. | |
Maintenance ID | 00* - 7F Displays the current maintenance ID number. Do not change this setting (Designed for Factory Use). |
|
LSU Adjustment | Input 160 bytes setting. |
Character: alphanumeric "0-9", "a-f", "A-F", only valid data can be input. Input length: 160 bytes |
Trans. Belt Adj | When you execute "Trans. Belt Adj", the transfer belt adjustment is done. This calibrates the motor speed to match the length of the new transfer belt. |
|
Fuser SC Detect | On/Off* | If On, the engine detects SC559. If Off, the engine does not detect "Fusing SC Reset". |
Fuser SC Reset | Resets the Fusing related SC. | |
Color Regist | The engine will do color registration and density tuning automatically. The printer will warm up automatically after this setting is changed. |
|
Special Mode | DFU (Designed for Factory Use) Do not change this setting. |
Economy Color | |
---|---|
Tentative Den | Text: 100 / 50 / 30 (Default: 100) Image: 100 / 50 / 30 (Default: 50) Graphic:100 / 50 / 30 (Default: 30) |
Conversion Mode | Sets the conversion mode for the economy color print. No: No conversion is executed. Color Up Mode: Converts into economy color. The image density is decreased. B&W Up Mode: Converts into Economy Black and white. |