Ricoh M200 SPC252DN PE-MF4
Service Mode. SERVICE MODE (PRINTER MODELS) 1
Menu List
Service Menu | ||
---|---|---|
Toner Limit | Toner Limit Tex | Determines the maximum amount of ink/toner you can use in any area of your text. This is where you are controlling exactly how much ink will be used during printing. [200 to 400 / 250 (Default)/ 10/step] Setting 0: Off |
Toner Limit Gra | Determines the maximum amount of ink/toner you can use in any area of your graphic. This is where you are controlling exactly how much ink will be used during printing. [200 to 400 / 250 (Default)/ 10/step] Setting 0: Off |
|
Toner Limit Ima | Determines the maximum amount of ink/toner you can use in any area of your image. This is where you are controlling exactly how much ink will be used during printing. [200 to 400 / 250 (Default)/ 10/step] Setting 0: Off |
Engine Maintenance | ||
---|---|---|
Model | Displays only Displays the current model in a dropdown list. Do not change this setting (Designed for Factory Use). |
|
Brand | 00* - 7F Displays the current brand ID number. Do not change this setting (Designed for Factory Use). |
|
PNP Name | NA Model: RICOH/ 'nul' EU Model: RICOH/ NRG/ LANIER ASIA Model: RICOH/ LANIER China Model: RICOH [0x00 to 0x7F / - / -] |
|
Destination | Sets the destination and updates the engine setting. DOM/ NA (Default)/ EU/ CHN/ TAIWAN/ ASIA / LA |
|
2nd Transfer | Media Type | Sets the Media type. *Plain paper, Thin Paper, Thick Paper 2, Thick Paper 1, Envelope, Cardstock, Bond Paper, Label Paper, Prepunched, Preprinted, Letterhead, Color Paper, Recycled Paper, Middle Thick |
2nd Front | Adjusts the transfer roller current, based on the default value. [-15 to 15 / 0 (Default) /1 я A/step] |
|
2nd Back | Adjusts the transfer roller current, based on the default value. [-15 to 15 / 0 (Default) /1 я A/step] |
|
Fuser Temp. | Adjusts the temperature of the fusing unit, based on the default value. [-30 to 0 / 0 (Default) / 2°C/step] |
|
Registration | Horiz. Tray1 | Adjusts the horizontal registration for tray 1. If the machine settings are reset to the factory defaults, this value does not change. [-15 to 15 / 0 (Default) / 1 mm/step] |
Vert.Tray1 | Adjusts the vertical registration for tray 1. If the machine settings are reset to the factory defaults, this value does not change. [-15 to 15 / 0 (Default) / 1 mm/step] |
|
Horiz Bypass Tray |
Adjusts the horizontal registration for the bypass tray. If the machine settings are reset to the factory defaults, this value does not change. [-15 to 15 / 0 (Default) / 1 mm/step] |