Ricoh M199 SPC250DN PE-MF4

These models have several service menus. Each service menu has several adjustment items. This section explains how to enter each service menu and what you can do in each service menu. Each menu is classified into two "Modes" depending on how you enter the service menus.

Menu Mode

• "Menu Mode" can be executed by pushing a sequence of keys.

This is a menu for maintenance and service.

Maintenance Mode Menu (MF models)

Service Mode (Printer models)

Special Mode

• "Special Mode" can be executed if you press certain keys at the same time as you turn the power on.

DFU Factory SP Factory Default Settings Menu (only for MF models)	This is a menu for initializing all information stored in the controller, except for some counters. These counters are initialized: Print/Scan/Copy/Fax functional Counter, Jam Counter These counters are not initialized: Printer/Scanner Engine Counter, which are printed in the "Configuration Page". After initializing with this menu, when the user powers on the machine, the Initial Setup Menu appears. The user must select Language in Country in this menu.
Fax Service Test Menu (only for MF models)	This is a menu for checking the fax mode.
Size Mismatch Detection	Specifies whether to detect the paper size mismatch