Ricoh GS1227
Service Program Mode. Entering
Note: Make sure that the data-in LED is not on before you go into the SP mode. This LED indicates that some data is coming to the machine. When the LED is on, wait for the printer to process the data.
Enabling and Disabling Service Program Mode
Note
• The Service Program Mode is for use by service representatives only, so that they can properly maintain product quality. If this mode is used by anyone other than service representatives for any reason, data might be deleted or settings might be changed. In such case, product quality cannot be guaranteed any more.
Entering SP Mode
Note: If there are no Classic Application (copy/printer/scanner/fax) icons on the Home screen, follow the procedure below to display the number keyboard.
- Press and hold the button [B] located at the right side of the operation panel and "Check Status [A]" at the same time, until the number keyboard is displayed.
- Enter the key code for SP mode.
Exiting SP Mode
Press "Exit" on the LCD twice to return to the user screen.
Note:
• To make the settings effective, turn the main power switch off and on after exiting service mode.