Ricoh D247 MP2014AD Bc-C1
Maintenance. PM Parts Settings
PM Parts Replacement Procedure
- Enter the SP mode.
- Output the SMC logging data.
- Set the following SPs to "1".
Item SP PCDU SP7-622-002 Transfer roller SP7-622-108 Fusing unit SP7-622-115 - Exit the SP mode.
- Turn off the main power.
- Replace the PM parts and turn the power on.
The machine will reset the PM counters.
After replacing the PCDU, execute SP2-801-001 (Deve Initializati Init TD Sen Execu) to reinitialize the TD sensor
After Installing the New PM parts
- Turn on the main power.
- Output the SMC logging data (page 188 "SMC Page Printing") and check the counter values.
- Make sure that the PM counters for the replaced units are "0" with SP7-621 and SP7-944.
Operation Check
Check if the sample image has been copied normally.