Ricoh D143 MPC4502A AP-C3
Troubleshooting. Process Control. Developer Initialization Result
SP-3-014-001 (Developer Initialization Result)
No. | Result | Description | Possible Causes/Action |
---|---|---|---|
1 | Successfully completed |
Developer initialization is successfully completed. | - |
2 | Forced termination |
Developer initialization was forcibly terminated. | • A cover was opened or the main switch was turned off during the initialization.
|
6 | Vt error | Vt is more than 0.7V when Vcnt is 4.3V. |
|
7 | Vcnt error 1 | Vcnt is less than 4.7V when Vcnt is Vt target ±0.2V. |
|
8 | Vcnt error 2 | Vt is more than 0.7V when Vcnt is 4.3V and Vcnt is less than 4.7V when Vcnt is Vt target ±0.2V. |
|
9 | Vcnt error 3 | Vcnt is less than 4.7V. |
|
Note:
- The machine starts developer initialization after you set "Enable" in SP3-902-005, 006, 007, or 008. Developer initialization automatically resumes when you open and close the front door or turn the main switch off and on if an error other than Error 8 occurs.