Ricoh D0BV IM600F
Image Quality. Failure due to the fixing failure
Symptom
The following image quality failure occurs due to the fixing failure.
- Backside partial stains
- Toner peeling
- Black spots caused by the toner fixation
Solution 1
Change the Fusing temperature using SP1-892-001 (Pressure Roller Dirt control).
0: Default
1: Raises the fusing temperature by 5 °C.
2: Raises the fusing temperature by 15 °C.
3: Raises the fusing temperature by 25 °C.
Note:
- When both SP1-892-001 and SP1-893-001 (Hot offset control) are set at the same time, SP1-892-001 has priority.
- This SP takes effect when the paper type is Plain Paper, Plain Paper 2, or Middle Thick.
- This SP setting is reflected to all trays.
- Set SP 1-892-001 (Pressure Roller Dirt Control) to “1”.
- Set SP 1-892-001 to ”2” if the symptom is not solved in step 1.
- Set SP 1-892-001 to “3” if the symptom is not solved in step 2.
Solution 2
Change the paper type setting to thicker with the procedure below.
• IM 550F/600F/600SRF
- Press the [User Tools] icon on the operation panel.
- Press [Tray Paper Settings].
- Press [Next].
- Select the tray from [Tray Paper Size: Tray 1] to [Tray Paper Size: Tray 5] for which you want to change the paper type.
- Change the paper type setting to thicker in [Paper Thickness].
• P 800/801
- Press the [Menu] key on the control panel.
- Select [Paper Input] -> Press [OK]
- Select the tray from [Tray Paper Size: Tray 1] to [Tray Paper Size: Tray 5] for which you want to change the paper type -> Press [OK]
- Change the paper type setting to thicker -> Press [OK] The setting is complete when specifying the following types of paper: Thin Paper, Plain Paper, Plain Paper 2, Middle Thick, Thick Paper 1, Thick Paper 2, Thick Paper 3, Special Paper 1, Special Paper 2, Special Paper 3
- If you have selected [Recycled Paper], [Color Paper], [Letterhead], [Label Paper], [Envelope], or [Preprinted Paper] for the paper type, press [Escape].
- Select [Maintenance] -> Press [OK]
- Select [General Settings] -> Press [OK]
- Select the paper thickness setting for the specified paper type -> Press [OK]
- Select the tray where the specified type of paper is loaded -> Press [OK] If you selected [Letterhead Setting], [Label Paper Setting], or [Envelope Setting] in Step 8, you can specify the paper thickness for each tray separately. For other paper types, the specified paper thickness is applied to all trays.
- Change the paper type setting to thicker -> Press [OK].