PrintCopy.info service

Ricoh D082 MPC7501 V-C3

 All About this machine
Table Of Contents 

Troubleshooting. SP2181 030 (Alignment Result) Errors 2

After SP2181 030 executes normally, you should see a "1" replace the "0" (default display). If you see any number other than a "1", this indicates an error.

Code. Error, Problem, Solution
31-33 Amount of skew calculated in the coverage pattern abnormal.
  Problem 1
  • ITB misaligned
Solution
  • Reinstall ITB.
  Problem 2
  • SP2153 023 set to 1 (OFF).
Solution
  • Set SP2153 023 to 0 (ON).
  Problem 3
  • Large amount of K skew.
Solution
  • Print a trim pattern with SP2109 002 Patten #10 (10: Trim Area).
  Problem 4
  • Image density too light, uneven.
Solution
  • Output a coverage pattern with SP2109 002 Pattern #1 (1: Grid pattern).
  • Check the images.
41-43 Intersecting lines of the grid pattern.
  Problem 1
  • ITB misaligned
Solution
  • Reinstall ITB.
  Problem
  • Image density too light.
Solution
  • Output a coverage pattern with SP2109 002 Pattern 1.
  • Check the images.
  Problem
  • Dirty, abnormal images.
Solution
  • Output Pattern 1, 18, or 20 with SP2109 002 and check the images.
51-53  
  Problem
  • ITB misaligned
Solution
  • Reinstall ITB.
  Problem
  • SP2153 001 set to 1 (OFF).
Solution
  • Set SP2153 001 to 0 (ON).

 

Problem

  1. Dirty, abnormal images.

Solution

  1. Output Pattern 1, 18, or 20 with SP2109 002 and check the images.

 

Problem

  1. Connector loose.
  2. Connector dirty.
  3. Harness defective.

Solution

  1. Check the ID sensor and its connection.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us