Ricoh D082 MPC7501 V-C3

After SP2181 030 executes normally, you should see a "1" replace the "0" (default display). If you see any number other than a "1", this indicates an error.

Code.	Error, Problem, Solution
2	Failure
	Problem 1 Large amount of skew. Large amount of K skew. Large amount of skew in every color. Solution Print a trim pattern with SP2109 002 Pattern #10 (Trim Area).
Code.	Error, Problem, Solution
	Problem 2 Density too light. Solution Print a coverage pattern with SP2109 002 Pattern #1 (1: Grid pattern). Check the images.
	Problem 3 • ITB scratched. Solution Replace the ITB.
12	Abnormal detection pattern
	Problem 1 ITB misaligned. Solution Reinstall ITB
	Problem 2 SP2153 023 set to 1 (OFF). Solution Set SP2153 023 to 0 (ON).
	Problem 3 Image density too light. Solution Output a coverage pattern with SP2109 002 Pattern 1. Check the images.
	Problem 4 Dirty, abnormal images. Solution Output Pattern 1, 18, or 20 with SP2109 002 and check the images.
21-23	Auto density out of range (over or lower)
	Problem 1 ITB misaligned Solution Reinstall ITB
	Problem 2 Image density too light, uneven. Solution Output a coverage pattern with SP2109 002 Pattern #1 (1: Grid pattern). Check the images.
	Problem 3 Connector loose. Connector dirty. Harness defective. Solution Check the ID sensor and its connection.