Ricoh D082 MPC7501 V-C3

Punch B702

	300K	2400K	3000K	4000K	EM
Punch Waste Hopper	I	I	I	I	I	Remove and empty
Punch Unit						Replace after 1000k punches.

Cover Interposer Tray B704

The PM interval is for the number of sheets that have been fed.

	60K	120K	180K	EM	Note
Feed Belt	R	R	R		Replace as a set.
Pick-up Roller	R	R	R		Replace as a set.
Separation Roller	R	R	R		Replace as a set.
Driver Rollers	C	C	C		Damp clean cloth.
Idle Rollers	C	C	C		Damp clean cloth.
Discharge Brush	C	C	C		Damp clean cloth.
Sensors	C	C	C		Blower brush.

3000-Sheet Finisher B830

	350K	700K	1050K	Note
FINISHER
Driver rollers	I	I	I	Alcohol
Idle rollers	I	I	I	Alcohol
Discharge brush	I	I	I	Alcohol
Shaft Bearings	I	I	I	Lubricate with silicone oil if noisy.
Sensors	I	I	I	Blower brush.
Jogger fences	I	I	I	Make sure that the screws are tight.
Staple waste hopper	C	C	C	Empty staple waste.

Punch B831

	300K	450K	600K	EM	Note
Punch Waste Hopper	I	I	I		Remove and empty

Cover Interposer Tray B835

The PM interval is for the number of sheets that have been fed.

	60K	As Needed	Note
Drive rollers		C	Dry cloth
Idle rollers		C	Dry cloth
Feed belt	R
Separation roller	R
Pick-up roller	R
Sensors		C	Blower brush.
Drive gears		I	Lubricate with a very small amount of G501.