Ricoh D081 MPC6501 V-C3
Troubleshooting. SP2181 030 (Alignment Result) Errors 1
After SP2181 030 executes normally, you should see a "1" replace the "0" (default display). If you see any number other than a "1", this indicates an error.
Code. | Error, Problem, Solution |
---|---|
2 | Failure |
Problem 1
Print a trim pattern with SP2109 002 Pattern #10 (Trim Area). |
|
Code. | Error, Problem, Solution |
Problem 2
|
|
Problem 3 • ITB scratched. Solution Replace the ITB. |
|
12 | Abnormal detection pattern |
Problem 1
|
|
Problem 2
|
|
Problem 3
|
|
Problem 4
|
|
21-23 | Auto density out of range (over or lower) |
Problem 1
|
|
Problem 2
|
|
Problem 3
|