Ricoh D065 MP8001 MT-C4
Maintenance. PM Tables. Optional Peripheral Devices
RT43 (A4 LCT) (B473)
| 300K | 450K | 1000K | Exp. | Note | |
|---|---|---|---|---|---|
| Pick-up Roller | R | 1000 | Always replace these rollers as a set. The target service life of the feed, pick-up, and separation rollers is 1000 K. However, they should be replaced sooner if the machine begins to jam or doublefeed | ||
| Feed Roller | R | 1000 | |||
| Separation Roller | R | 1000 |
Cover Interposer Tray Type 3260 (B704)
The cover interposer tray can be used with the Finisher SR4030 (D374), SR4040 (D373) or Finisher SR4050 (D460). The interposer tray is installed between the main machine and the finisher.
Note:
The PM interval is for the number of sheets that have been fed.
| 60K | 120K | 180K | Exp. | Note | |
|---|---|---|---|---|---|
| Feed Belt | R | R | R | Replace as a set. | |
| Pick-up Roller | R | R | R | ||
| Separation Roller | R | R | R | ||
| Driver Rollers | C | C | C | Damp clean cloth. | |
| Idle Rollers | C | C | C | Damp clean cloth. | |
| Discharge Brush | C | C | C | Damp clean cloth. | |
| Sensors | C | C | C | Blower brush. |
Finisher SR4050 (3K Finisher D460)
|
350K |
700K |
1050K |
Exp. |
Note |
|---|---|---|---|---|---|
Drive rollers |
I |
I |
I |
|
Alcohol |
Idle rollers |
I |
I |
I |
|
|
Discharge brush |
I |
I |
I |
|
|
Bushings |
I |
I |
I |
|
Lubricate with silicone oil if noisy. |
Sensors |
I |
I |
I |
|
Blow brush. |
Jogger fences |
I |
I |
I |
|
Make sure screws are tight. |
Staple waste hopper |
C |
C |
C |
|
Empty staple waste. |
Finisher SR4030 (D374)/ SR4040 (D373)
| 2400K | 3000K | 4000K | Exp. | Note | |
|---|---|---|---|---|---|
| Covers | I/C | Alcohol or water, dry cloth | |||
| Drive Rollers | C | Damp cloth, dry cloth | |||
| Idle Rollers | C | Damp cloth, dry cloth | |||
| Anti-Static Brush | C | Dry cloth | |||
| Sensors | C | Blower brush | |||
| Corner Stapler | R | Print an SMC report with SP5990. Replace the unit if the staple count is 500K. |
|||
| Booklet Stapler | R | Print an SMC report with SP5990. Replace the unit if the staple count is 200K. |
Punch Unit Type 3260 (B702) for Finisher SR4030 (D374)/ SR4040 (D373)
|
2400K |
3000K |
4000K |
EM |
Note |
|---|---|---|---|---|---|
Punch Waste Hopper |
I |
I |
I |
I |
Remove and empty |
| Punch Unit | C | Replace after 1000k punches. |
Multi-Folding Unit FD5000 (D454)
| Part | PM Visit | Notes |
|---|---|---|
| Rollers (drive, idle rollers) | l/C | Alcohol, clean cloth |
| Anti-static brush | l/C | |
| Shafts | I/C | Lubricate with silicone oil if noisy. |
| Sensors | I/C | Blower brush |
| Positioning roller | I/C | Inspect for scratches or nicks |
| Fold rollers (1st, 2nd, 3rd) | I/C | Alcohol, clean cloth |
| Crease rollers (drive, idle roller) | I/C |
Related SP Codes
| SP7803 | PM Counter Display | Displays the PM count since the last PM. |
| SP7804 | PM Counter Reset | Resets the PM count. |