Ricoh D010 MP2500 PR-C1

The following two modes are available:

• SP Mode (Service Program Mode): The SP Mode includes the programs that are necessary for standard maintenance work.
• SSP Mode (Special SP Mode): The SSP Mode includes SP-Mode programs and some special programs. You need some extra knowledge to manipulate these special programs. For details, consult your supervisor.

Starting SP Mode

1. Type the keys as follows: [Clear Modes] > [1] > [0] > [7]
2. Press the [Clear/Stop] key and hold it down until the SP-mode menu is displayed (about 3 seconds).

Selecting Programs

• When a blinking underscore (or several blinking underscores) shows, you can type a number from the numeric keypad [D].
• When the sign "◄ ► / OK" [A] shows in the upper right corner, you can scroll through the menu by pressing the left-arrow key [B] or the right-arrow key [C]. To select a program, press the "OK" key [F].

Specifying Values

1. After locating a program, press the "OK" key. A blinking underscore (or several blinking underscores) indicates which value you can change. The value in parentheses is the default value of the menu.
2. Type a necessary value from the numeric keypad. To switch between positive (plus) and negative (minus) values, press the [./*] (period/asterisk) key.
3. To validate the value, press the "OK" key. To cancel the value, press the cancel key [E].

Activating Copy Mode

You can activate the copy mode while the SP mode is running. When you do so, the copier outputs images or patterns that help you adjust the SP-mode program.

1. Press the [Start] key. The copy mode is activated.
2. Specify copy settings and press the "OK" key.
3. To return to the SP mode, press the [Clear/Stop] key.

Note:

• You cannot end the SP mode while the copy mode is activated.

Quitting Programs/Ending (S)SP Mode

Press the [Clear /Stop] key or the "Cancel" key to quit the program. You can end the SP mode by pressing one of these keys several times.