Ricoh B291 MP3500 A-C4.5
Service Program Mode. UPLOADING/ DOWNLOADING NVRAM DATA
The content of the NVRAM can be uploaded to and downloaded from an SD card.
UPLOADING NVRAM DATA (SP5-824)
- Turn off the main switch.
- Remove the SD card cover [A].
- Insert the SD card [B] into SD card slot C3.
- Turn on the main switch.
- Execute SP5-824.
- Press [1] to start uploading the NVRAM data.
DOWNLOADING NVRAM DATA (SP5-825)
The following data are not downloaded from the SD card:
- Total count categories (SP7-003-*** Copy Counter)
- C/O, P/O Counter (SP7-006-*** C/O, P/O Count Display)
- Dupelx, A3/DLT/Over 420 mm, Staple and Scanner application scanning counters (system settings).
- Turn off the main switch.
- Remove the SD card cover [A].
- Plug the SD card [B] into SD card slot C3.
- Turn on the main switch.
- Execute SP5-825.
- Press [1] to start downloading the NVRAM data.
Note that the following errors could occur during downloading:
- If a card is not installed in the card slot and a message tells you that downloading cannot proceed, you cannot execute downloading, even by pressing [1].
- If the correct card for the NVRAM data is not inserted in the card slot, after you press [1] a message will tell you that downloading cannot proceed because the card is abnormal and the execution will halt.