Ricoh B205 Aficio 3025 R-C4
Maintenance. PM Tables 1
NOTE:
- The amounts mentioned as the PM interval indicate the number of prints.
- After carrying out PM, clear the maintenance counter (SP7-804).
Symbol key: C: Clean, R: Replace, L: Lubricate, I: Inspect
EM 120K | 240K | 360K NOTE | |||
---|---|---|---|---|---|
SCANNER/LASER OPTICS | |||||
Reflector | C | C | C | Optics cloth | |
1st Mirror | C | C | C | C | Optics cloth |
2nd Mirror | C | C | C | C | Optics cloth |
3rd Mirror | C | C | C | C | Optics cloth |
Scanner Guide Rails | C | C | C | Do not use alcohol. | |
Platen Sheet Cover | C | I | I | I | Replace the platen sheet, if necessary. Dry cloth or alcohol |
Exposure Glass | C | C | C | Dry cloth or alcohol | |
Toner Shield Glass | C | C | C | Optics cloth | |
APS Sensor | C | C | C | Dry cloth or blower brush |
EM | 120K | 240K | 360K | NOTE | |
---|---|---|---|---|---|
AROUND THE DRUM | |||||
Transfer/Separation Unit |
R | R | R | ||
ID Sensor | C | C | C | Perform the ID sensor initial setting (SP2-935) after cleaning (blower brush) |
EM | 60K | 120K | 180K | NOTE | |
---|---|---|---|---|---|
PCU | |||||
Drum | R | R | R | Do SP2801. This initializes the developer and resets the TD and ID sensor outputs to their defaults. It also resets the PCU counter. | |
Charge Roller | R | R | R | ||
Cleaning Roller | R | R | R | ||
Cleaning Blade | R | R | R | ||
Pick-off Pawls | R | R | R | ||
Developer | R | R | R |
EM | 120K | 240K | 360K | NOTE | |
---|---|---|---|---|---|
PAPER FEED | |||||
Registration Rollers | C | C | C | C | Clean with water |
Paper Feed Roller | C | R | R | R | Clean with water |
Friction Pad | C | R | R | R | Dry cloth |
Paper Feed Guides | C | C | C | C | Clean with alcohol. |
Relay Rollers | C | C | C | C | Clean with water. |
Bottom Plate Pad | C | C | C | C | Clean with water. |
Registration Roller Mylar | C | C | C | C | Clean with water. |
Dust collection box | C | C | C | C | Remove, empty, clean |
EM | 120K | 240K | 360K | NOTE | |
---|---|---|---|---|---|
FUSING UNIT AND PAPER EXIT | |||||
Fusing Entrance and Exit Guide Plates | C | C | C | Clean with water or alcohol. | |
Hot Roller | R | R | R | Clean with water or alcohol. | |
Pressure Roller | R | R | R | ||
Fusing Thermistors | R | R | R | ||
Cleaning Roller | C | C | C | ||
Cleaning Roller Bushings | C | C | C | ||
Hot Roller Strippers | R | R | R | ||
Hot Roller and Pressure Roller Bushings | L | L | L | L | Grease Barrierta JFE5 5/2 (A0289300) |
Paper Exit Guide Ribs |
C | C | C | Clean with water or alcohol. | |
OTHERS | |||||
Main Motor Drive Gear |
L | I | I | I | Silicone Grease G501 |