OKI MC873dn
Self-diagnostic mode. Color registration adjustment test
The color registration adjustment test is used for adjusting color registration or investigating the cause(s) of color misregistration.
- Enter the self-diagnostic-mode(Level1) and, until the following message appears, press the [2] or [8] button.
REG ADJUST TEST - Press the [6] button. The following message appears. Press the [2] or [8] button until the intended option appears.
REG ADJUST TEST
REG ADJ EXECUTE - Press the [6] button. The displayed option is performed:
When the displayed option is REG ADJ EXECUTE:
① Color registration adjustment test ('REG ADJ EXECUTE' starts blinking) is performed.
② When the test ends, the panel shows the result of the test (OK or an error name) and ‘****RESULT’.
OK
REG ADJ RESULT
Pressing the [2] button displays the next test result.
Pressing the [8] button displays the preceding test result.
Press the [4] button to return to step 2.
Remark: The following message appears while the printer is initialized or issues an alarm or when the cover is open.
NG
REG ADJ RESULT
③ Pressing the [#] button during the test cancels the test (turning on the ONLINE lamp), restoring the state of step 2.
When the displayed option is REG ADJ RESULT:
Same as of REG ADJ EXECUTE
When the displayed option is BLT REFLECT TEST:
① Color registration adjustment belt reflection test ('BELT REFLECT TEST' starts
blinking) is performed.
② When the test ends, the panel shows the result of the test (OK or a error name)
and ‘****RESULT’.
OK
BLT REFLECT RSLT
Pressing the [2] button displays the next test result.
Pressing the [8] button displays the preceding test result.
Press the [4] button to return to step 2.
③ Pressing the [#] button during the test cancels the test, restoring the state of step 2.
When BLT REFLECT RSLT is executed:
Same as the button operation of (2) after execution of BLT REFLECT TEST.
Remark: The following message appears while the printer is initialized or issues an alarm or when the cover is open.
NG
REG REFLECT RSLT - Repeat steps 2 and 3 when necessary.
- Press the [4] button to end the test (the state if step 1 is restored).
Color registration correction test items
Display | Function |
---|---|
REG ADJ EXECUTE | Executes color registration adjustment. |
REG ADJ RESULT | Displays the result of color registration adjustment. |
BLT REFLECT TEST | Judges whether color registration adjustment belt reflection is proper. |
BLT REFLECT RSLT | Displays the result of color registration adjustment belt reflection judgment. |