-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
OKI MB770 plus
Troubleshooting. 2. Abnormal operations of printer after the power is turned on 3
Bad odors are generated.
Check item |
Check work |
Action at NG |
Locating the exact position of generating bad odor |
Fuser unit |
Remove the fuser unit and check the odor. |
Implement section (Check the jumping phenomena of gear tooth) |
Low voltage power supply unit |
Remove the low voltage power supply unit and check the odor. |
Replace the low voltage power supply unit |
Check conditions of the fuser unit |
Life count of fuser unit |
Check the life count of the fuser unit by using the self-diagnostic mode. |
The fuser close to the new fuser unit smells some odors. |
Check that no foreign material exists in fuser unit. |
Check that no foreign materials such as paper are stuck inside of the fuser unit. |
Remove the foreign material. |
Rise-up time is slow.
Check item |
Check work |
Action at NG |
Check the fuser unit |
Halogen lamp |
Check that 120V or 230V is shown on the label on the rear of the fuser unit. (120V:ODA,230V:ODA/OEL) |
Replace the fuser unit. |