OKI ES8434
Maintenance Mode. How to Enter
For maintenance personnel
This menu is activated by holding down
[BACK], [ENTER] and [ONLINE] buttons
at the apparatus status in standby and then enter the password.
Initial Password: 000000
Item (1st Line) | Value (2nd Line) | Functions |
---|---|---|
Enter Password | ************ | Enter a password to enter System Maintenance menu. The default value is "000000" From 6 to 12 digits of alphanumeric characters to input. |
Save Syslog | Execute | Save the network communication log(syslog) to nonvolatile memory |
Print Syslog | Execute | Print the network communication log(syslog) |
Condition Log size | 20 50 100 500 |
Sets the number of errors per CSV error log to be returned using an HTTP. Sends back CSV error logs containing errors subsequent to the latest error by the number that is set with this menu. Default: 20 errors |
Adminpassword Reset | Execute | Resetting the administrator password to the factory default value "123456". Display the following confirmation message when push the [ENTER] button. ARE YOU SURE? YES/NO When NO is chosen, return to previous menu indication. When YES is chosen, execute initialization. |
New Parts Keep Mode | Execute | Check for the operation while changing the supplies during keeping the power ON. The check mode will finish and invalid if turning the power ON. |
Engine Status | Execute | Prints engine information. |
Engine Diag Mode | Enters self-diagnosis mode of the engine. | |
Power Save | Enable Disable |
Sets Enable/Disable of Power Save Mode. |
Sleep | Enable Disable |
Sets Enable/Disable of Deep Sleep Mode. |
Change Password | ||
New Password | ************ | Sets a new password to enter "System Maintenance" menu From 6 to 12 digits of alphanumeric characters can be enter. |
Verify Password | ************ | Input the new password to enter "System Maintenance" menu which is set by "New Password" for confirmation. From 6 to 12 digits of alphanumeric characters can be enter. |