OKI C910

The printer is adjusted by key operation on the Maintenance Utility and the Operator Panel. Select the menu according to the items to adjust and the purpose of adjustment.

System Maintenance Menu

This menu is launched by turning on the power source while keeping the [Menu+]+[Menu-]+[Help] switches pressed.

The menu display is only available in English regardless of destination.

Note

• This menu can be modified according to the destination, etc. Therefore, it is not open (closed) to the end user.
• C910 needs password to enter the System Maintenance Menu. Default is "000000".

Caution

Do not reset the OKIUSER Setting of the C930 Series. Resetting OKIUSER resets settings made in it, including its model name and server name. When the OKIUSER menu has been entered on it, press the Return button to exit from the menu.

Item	Value	Old Menu	Function
OKI USER	ODA OEL APS JP1 JPOEM1 OEMA OEML	"SYSTEM MAINTENANCE MENU" - "OKIUSER" - "OKIUSER"	Set the destination. JPOEM1: Japan OEM OEMA : A4 Default Overseas OEM OEML : Letter Default Overseas OEM Automatically reboot after escaping from the menu. The default value for non-PS models is JP1.
Maintenance Menu	NEXT		This displays the menu to initialize the harddisk and Flash ROM.
Maintenance Print Menu	Enable Disable		This switches whether to Show/ Hide the "Print Information" – "ID Check Pattern" and "Engine Status" of the Function Menu. If this item is disabled, the "Print Information" – "ID Check Pattern" and "Engine Status" of the Function Menu is never displayed. The printer is restarted after the settings are modified and escaping from the menu.
Print Page Count	Enable Disable	"SYSTEM MAINTENANCE MENU" - "PAGE CNT PRINT" - "PAGE CNT PRINT"	This sets whether to Show/Hide the display of the "Functions"- "Configuration" - "Print Page Count"-"Total Page".
Personality	NEXT		This displays the menu to edit the default PDL language supported according to destination.
Change Password	NEXT
Diagnostic Mode		"SYSTEM MAINTENANCE MENU"- "DIAGNOSTIC MODE XX.XX"	This goes to the engine’s selfdiagnosis mode.
Format HDD	Execute	"SYSTEM MAINENANCE MENU" – "MAINTENANCE MENU" – "HDD INITIALIZE"	Initialize the HDD. When executed it will escape from the menu and start initializing the HDD. [Display Condition] • Mount HDD ("Boot Menu"- "Storage Setup"- "Enable Initialization "Enable, "Boot Menu"-"Storage Setup"-"Enable HDD" Yes)
FormatFlash ROM	Execute	"SYSTEM MAINENANCE MENU"- "MAINTENANCE MENU" – "FLASH INITIALIZE"	This displays the menu to initialize the Flash ROM. * Do not use this Menu.
Reset EEPROM	Execute	"SYSTEM MAINENANCE MENU"- "MAINTENANCE MENU" –"MENU RESET"	This resets the EEPROM details to the factory preset (factory default) value. It automatically reboots after the settings are made and applied. * Some special items are not initialized.
IBM5577	Enable Disable		Changes the default PDL language supported according to the destination.The PDL language disabled from this menu will no longer be displayed on the "Print Setup" – "Personality" of the Function menu. When receiving print data in the disabled PDL language, display "INVALID DATA" and dispose the incoming data. (HPGL/ 2 is currently under development and there are no plans scheduled for application for the product). PDF requires Adobe Postscript, therefore, it is not possible to turn PDF ON/OFF by itself (if Adobe Postscript is DISABLED, the PDF Function will also be DISABLED). It is not possible to DISABLE Adobe Postscript and PDF with PX711/713. (It shall be usually used in the ENABLE state. Though DISABLE is set the incoming data will still be processed. It has been incorporated for future extension purposes.)
IBM PPRIII XL	Enable Disable	"SYSTEM MAINENANCE MENU"- "PERONALITY" – "IBM PPR III XL"
EPSONFX	Enable Disable	"SYSTEM MAINENANCE MENU"- "PERONSALITY"– "EPSON fx"
HP-GL/2	Enable Disable	"SYSTEM MAINENANCE MENU"- "PERSONALITY" – "hp-gl/2"
Change Password
New Password	********** **		Sets a new password to enter “System Maintenance” menu. From 6 to 12 digits of number or Roman character can be enter.
Verify Password	********** **		Makes User input the new password to enter “System Maintenance” menu which is set by “New Password” for confirmation. From 6 to 12 digits of number or Roman character can be enter.