Lexmark 7562-496 XS796dte
Troubleshooting. Paper jams. 201 Additional checks
- Open the side door.
- Determine where the jam is located, and then remove it:
a) If paper is inside the fuser, then open the fuser access door.
b) Firmly grasp the jammed paper on each side, and then gently pull it out.
Warning: Do not touch the center of the fuser unit. Doing so will damage the fuser.
Note: Make sure all paper fragments are removed. - Close the side door.
- From the operator panel, touch Continue, jam cleared.
Additional checks—201 paper jam
Error code | Description | Action |
---|---|---|
201.01 | Bubble sensor active when printer powers up or a cover is closed. Possible causes:
|
|
201.02 | Bubble sensor is made early. Possible causes:
|
|
201.03 | Bubble sensor is never made or is made late. Possible causes:
|
|
201.04 | Bubble sensor broke early. Possible causes:
|
|
201.05, 201.07, 201.08 |
Bubble sensor is never made or is made late. | See “201.03” . |
201.42 | A narrow banner media error has occurred. |
|
201.51 | Bubble sensor active when printer powers up or a cover is closed. (Fuser past life) |
See “201.01” . |
201.52 | Bubble sensor is made early. (Fuser past life) |
See “201.02” . |
201.53 | Bubble sensor is never made or is made late. (Fuser past life) |
See “201.03” . |
201.54 | Bubble sensor broke early. (Fuser past life) |
See “201.04” . |
201.55, 201.57, 201.58 |
Bubble sensor is never made or is made late. (Fuser past life) |
See “201.03” . |