Lexmark 3400-481 MB2236adw

Printed page count (mono)

This setting displays the amount of pages printed in mono.

1. Enter the Diagnostics menu, and then navigate to: Printer Setup > Printed page count (mono)
2. View the printed page count for mono.

Permanent page count

This setting displays the total number of pages printed. After all the print tests are completed, this value resets to zero.

1. Enter the Diagnostics menu, and then navigate to: Printer Setup > Permanent page count
2. View the permanent page count.

Processor ID

This setting indicates the ID of the processor on the controller board.

1. Enter the Diagnostics menu, and then navigate to: Printer Setup > Processor ID
2. View the processor ID.

Serial number

This setting displays a read-only value of the printer serial number.

1. Enter the Diagnostics menu, and then navigate to: Printer Setup > Serial number
2. View the serial number.

Model name

This setting displays the model name of the printer.

1. Enter the Diagnostics menu, and then navigate to: Printer Setup > Model name
2. View the model name.

Engine setting [x]

Warning—Potential Damage: Do not change this setting without specific instructions from the next level of support.
This setting allows you to select a printer engine setting. Possible values are 0–255. 0 is the default.

1. Enter the Diagnostics menu, and then navigate to: Printer Setup > Engine setting [x]
2. Select a setting, enter a value, and then press [OK].

EP setup

Warning—Potential Damage: Do not change this setting without specific instructions from the next level of support.
This setting allows you to adjust the EP setup of the printer.

1. Enter the Diagnostics menu, and then navigate to: Printer Setup > EP setup
2. Select a setting.