| Section |
Maintenance item |
Outline |
| Fuser |
U148 Drum refresh mode setting |
Set auto drum refresh mode |
| U155 Toner sensor output |
Display toner sensor output |
| U156 Toner control level adjustment |
Display/adjust toner empty level |
| U157 Developer drive time |
Display/set the developer drive time |
| U158 Developer counter |
Display/set the developer counter |
| U159 Set Toner container function setting |
Display/set the accumulated dot counts |
| U161 Fuser temperature adjustment |
Set the fuser control temperature |
| U164 Fuser unit history |
Display the machine number and the fuser unit history |
| U165 Fuser unit number |
Display the fuser unit number |
| U167 Clearing the fuser count |
Display/clear the counter value |
| U169 Setting the fuser power source |
Display/set the IH PWB control voltage specification |
| U193 Fuser drive control setting |
Change the fuser drive control setting |
| U199 Fuser temperature |
Monitor the fuser temperature |
| Operatio n Section Support equipme nt |
U200 All LEDs lighting |
Light all the LED on the operation panel |
| U201 Initializing the touch panel |
Correct the X and Y axis position of the touch screen |
| U203 Check DP operation |
Check the DP conveying operation for DP itself |
| U204 Key card/key counter setting |
Key card/key counter connection setting |
| U206 Set the coin vendor |
Set the coin vendor |
| U207 Operation key check |
Check the key operation of the operation panel |
| U208 Setting the paper size for the side feeder |
Set paper size in the side feeder |
| U221 USB host lock function setting |
Set ON/OFF of the USB Host lock function |
| U222 Setting the IC card type |
Set the ID card type |
| U223 Operation panel lock |
Set ON/OFF of the operation panel lock function |
| U224 Setting Original Panel Display |
Set the opening screen |
| U230 Optional device serial number |
Display the serial number of the enhancement devices |
| U234 Setting destination for punch |
Set the punch destination |
| U237 Finisher eject volume limit |
Set the main tray stack capacity |
| U240 Finisher operation check |
Check the drive operation |
| U241 Finisher switch check |
Check the switch operation |
| U243 Checking the DP motor |
Drive the DP motor/solenoid |
| U244 DP switch check |
Drive the DP sensor |
| U246 Finisher adjustment |
Set the finisher adjustment value |
| U247 Paper feed operation check |
Drive the PF motor/clutch |
| Mode setting |
U250 Set Maintenance Counter Pre-set |
Change the preset value |
| U251 clearing the maintenance counter |
Display/clear/change the counter value |