Kyocera TASKalfa 6551ci
Troubleshooting. Mechanical problems 1
1. No primary paper feed
Causes/check procedures | Corrective measures |
---|---|
Check if the surfaces of the following rollers are dirty with paper powder. Forwarding pulley Paper feed pulley MP paper feed pulley PF forwarding pulley PF paper feed pulley |
Clean with isopropyl alcohol. |
Check if the following rollers is deformed. Forwarding pulley Paper feed pulley MP paper feed pulley PF forwarding pulley PF paper feed pulley |
Check visually and replace any deformed |
Defective paper feed clutch 1, 2, MP paper feed clutch or PF paper feed clutch 1, 2 installation. | Check visually and remedy if necessary. |
2. No secondary paper feed.
Causes/check procedures | Corrective measures |
---|---|
Check if the surfaces of the following rollers are dirty with paper powder. Right registration roller Left registration roller |
Clean with isopropyl alcohol. |
Defective registration motor installation. | Check visually and remedy if necessary. |
3. Skewed paper feed.
Causes/check procedures | Corrective measures |
---|---|
Paper width guide in a cassette installed incorrectly. | Check the paper width guide visually and remedy or replace if necessary. |
4. Multiple sheets of paper are fed.
Causes/check procedures | Corrective measures |
---|---|
Check if the paper is excessively curled. | Change the paper. |
Paper is loaded incorrectly. | Load the paper correctly. |
Check if the separation pulley is worn. | Replace the separation pulley if it is worn |
5. Paper jams.
Causes/check procedures | Corrective measures |
---|---|
Check if the paper is excessively curled. | Change the paper. |
Check if the contact between the right and left registration rollers is correct. | Check visually and remedy if necessary. |
Check if the heat roller or press roller is extremely dirty or deformed. | Check visually and replace the fuser unit |
Check if the contact between the PF feed roller 1, 2 and PF feed pulleys is correct. | Check visually and remedy if necessary. |