Problem |
Causes/check procedures |
Corrective measures |
(6) A paper jam in the paper feed section is indicated during copying (no paper feed from optional side feeder). Jam code 14 |
Large size side feeder |
Defective side feeder feed switch 1. |
Run maintenance item U233 and turn the side feeder feed switch 1 on and off manually. Replace the side feeder feed switch 1 if indication of the corresponding sensor on the touch panel is not displayed in reverse. |
Defective side feeder feed switch 2. |
Run maintenance item U233 and turn the side feeder feed switch 2 on and off manually. Replace the side feeder feed switch 2 if indication of the corresponding sensor on the touch panel is not displayed in reverse. |
Check if the side feeder paper feed motor malfunctions. |
Run maintenance item U247 and select the side feeder paper feed motor on the touch panel to be turned on and off. Check the status and remedy if necessary. |
Electrical problem with the side feeder paper feed motor. |
Check. |
(7) A paper jam in the paper feed section is indicated during copying (no paper feed from MP tray). Jam code 15 |
Paper on the MP tray is extremely curled. |
Change the paper. |
Check if the MP paper feed pulley, MP forwarding pulley and MP separation pulley of the MP tray are deformed. |
Check visually and replace any deformed pulleys. |
Defective feed switch 1. |
Run maintenance item U031 and turn feed switch 1 on and off manually. Replace feed switch 1 if indication of the corresponding switch on the touch panel is not displayed in reverse. |
Check if the MP feed motor malfunctions. |
Run maintenance item U030 and select the MP feed motor on the touch panel to be turned on and off. Check the status and remedy if necessary. |
Electrical problem with the MP feed motor. |
Check |
(8) A paper jam in the paper feed section is indicated during copying (jam in copier vertical paper conveying section 1). Jam code 19 |
Broken feed switch 4 actuator. |
Check visually and replace feed switch 4 if its actuator is broken. |
Defective feed switch 4. |
Run maintenance item U031 and turn feed switch 4 on and off manually. Replace feed switch 4 if indication of the corresponding sensor on the touch panel is not displayed in reverse. |
Broken feed switch 5 actuator. |
Check visually and replace feed switch 5 if its actuator is broken. |
Defective feed switch 5. |
Run maintenance item U031 and turn feed switch 5 on and off manually. Replace feed switch 5 if indication of the corresponding sensor on the touch panel is not displayed in reverse. |
Defective timing switch 3. |
Run maintenance item U031 and turn timing switch 3 on and off manually. Replace timing switch 3 if indication of the corresponding sensor on the touch panel is not displayed in reverse. |
Defective timing switch 4. |
Run maintenance item U031 and turn timing switch 4 on and off manually. Replace timing switch 4 if indication of the corresponding sensor on the touch panel is not displayed in reverse. |
The vertical feed roller is dirty with paper powder. |
Check and, if it is dirty, clean it. |
The vertical feed roller is deformed or worn. |
Check and, if it is deformed or worn, fix or replace it. |