-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Kyocera TASKalfa 4012i
Error message. The error occurred in the cassette X
(Cassette 1, 2) even after removing/inserting the cassette and checking/removing paper remaining in the main unit
Step |
Check description |
Assumed cause |
Measures |
1 |
Reinserting the primary paper feed unit |
The primary paper feed unit is not inserted completely. |
Pull the primary paper feed unit out, then reinsert it completely. |
2 |
Checking the lift plate |
The lift plate does not rise up. |
Reattach the lift plate. If it is deformed, replace it. |
3 |
Checking the connection |
The connector is not connected properly, or the wire is faulty. |
Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire.
- Lift motor 1, 2 - Feed drive PWB
- Feed drive PWB - Engine PWB
|
4 |
Replacing the lift motor |
The lift motor is faulty. |
In case if it does not improve even U906 (Reset disable function) is executed, replace the lift motor 1 and 2. |
5 |
Replacing the feed drive PWB |
The feed drive PWB is faulty. |
Replace the feed drive PWB. |
6 |
Replacing the engine PWB |
The engine PWB is faulty. |
Replace the engine PWB. |
(Cassette 3, 4) even after removing/inserting the cassette and checking/removing paper remaining in the main unit
Object: Paper feeder or Large capacity feeder
Step |
Check description |
Assumed cause |
Measures |
1 |
Reinserting the PF primary paper feed unit |
The PF primary paper feed unit is not inserted completely. |
Pull out the PF primary feed unit and reinsert it completely. |
2 |
Checking the lift plate |
The PF lift plate does not rise up. |
Reattach the PF lift plate. If it is deformed, replace it. |
3 |
Checking the connection |
The connector is not connected properly, or the wire is faulty. |
Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire.
- PF lift motor 1, 2 - PF PWB
- PF PWB - Engine PWB
|
4 |
Replacing the PF lift motor |
The PF lift motor is faulty. |
In case if it does not improve even U906 (Reset disable function) is executed, replace the PF lift motor 1 and 2. |
5 |
Replacing the PF PWB |
The PF PWB is faulty. |
Replace the PF PWB. |
6 |
Replacing the engine PWB |
The engine PWB is faulty. |
Replace the engine PWB. |