-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Kyocera TASKalfa 4002i
Troubleshooting. Abnormal Noise 1
1. Abnormal noise occurs.
Step |
Check description |
Assumed cause |
Measures |
1 |
Applying the grease |
The grease on each gear or bushing is not enough. |
Check the rotation of the roller, pulley and the gears, and apply the grease to the gears and the bushings if not rotating smoothly. |
2 |
Checking the gear and the bushing |
The parts such as each gear or bushing are not properly attached. |
Reattach the gear or the bushing. |
2. Abnormal sounds from the paper conveying section
Frictional wear, smudges / foreign objects adhesion on the conveying rollers, pulleys and the gears
Step |
Check description |
Assumed cause |
Measures |
1 |
Cleaning and applying the grease |
The bushing or the gear is dirty or foreign objects are on them. |
Clean the bushings and the gears for the registration roller, middle roller, transfer roller and the DU conveying roller, and apply grease to them. |
2 |
Cleaning and applying the grease |
The inside of the pulley is worn down. |
Clean the drive shaft of the middle pulley and apply the grease to it. |
3 |
Cleaning and applying the grease |
The gear tooth are dirty or foreign objects are on them. |
Clean the transfer drive gear and the registration drive gear and apply the grease to them. |
4 |
Checking the feed drive unit |
The paper feed drive unit is faulty. |
Replace the paper feed drive unit. |
3. Abnormal noise from the developer section
Caused by the developer unit.
Step |
Check description |
Assumed cause |
Measures |
1 |
Checking the developer unit |
The developer unit drive is faulty. |
Isolate the abnormal developer unit by U030, and check if the developer powder does not leak from the developer unit, there is no damage, or the roller rotates manually. Fix the parts if necessary. |
2 |
Checking the developer unit |
The developer unit is faulty. |
Replace the developer unit with faulty color. |
4. Abnormal noise from the document processor
The frictional wear, affixing the smudges or the foreign objects, improperly attaching of the part
Step |
Check description |
Assumed cause |
Measures |
1 |
Cleaning and applying the grease |
The bushing or the gear is dirty or foreign objects are on them. |
Clean the bushing and the shaft of the DP conveying roller and apply the grease to them. |
2 |
Checking the bushing |
The bushing is worn down. |
Replace the bushing. |
3 |
Cleaning and applying the grease |
The drive gear is dirty or foreign objects are on it. |
Clean the drive gears of the DP conveying motor and the DP reverse motor and apply the grease to them. |
4 |
Checking the motor |
The DP conveying motor or the DP reverse motor does not engage with the drive gear. |
Reattach the DP conveying motor or the DP reverse motor. |