Kyocera TASKalfa 3510i
Maintenance Mode. Modes List: U000 - U053
Section | Item No. | Content of maintenance item | Initial setting |
---|---|---|---|
General | U000 | Outputting an own-status report | - |
U001 | Exiting the maintenance mode | - | |
U002 | Setting the factory default data | - | |
U003 | Setting the service telephone number | - | |
U004 | Setting the machine number | - | |
U010 | Setting the maintenance mode ID | - | |
U018 | Check Firmware Checksum | - | |
U019 | Displaying the firrmware version | - | |
Initializa- tion | U021 | Memory initializing | - |
U024 | HDD formatting | - | |
U025 | Firmware Update(Security) | - | |
U026 | Pulling Backup Data | - | |
Drive, paper feed and paper conveying system | U030 | Checking the operation of the motors | - |
U031 | Checking switches and sensors for paper convey- ing | - | |
U032 | Checking the operation of the clutches | - | |
U033 | Checking the operation of the solenoids | - | |
U034 | Adjusting the print start timing LSU Out Top LSU Out Left |
41/43/ 0/0/0/0/0/0 |
|
U035 | Setting the printing area for folio paper | 330/210 | |
U037 | Checking the operation of the fan motors | - | |
U051 | Adjusting the deflection in the paper | 0/0/0/0 | |
U053 | Setting the adjustment of the motor speed Main MPT Duplex Cassette2 Feed2 Polygon Exit |