Kyocera TASKalfa 3010i
Maintenance Mode. Modes List: U206 - U247
| Section | Item No. | Content of maintenance item | Initial setting |
|---|---|---|---|
| Operation panel and support equipment |
U206 | Setting the presence or absence of a coin vender On/Off Config No Coin Action Normal B/W CMY RGB Full Color |
Off Off 10/10/10/10 100/50/30/50 100/50/30/50 100/50/30/50 |
| AD | 10/10/10/10 | ||
| B/W | |||
| CMY | 100/50/30/50 | ||
| RGB | 100/50/30/50 | ||
| Full Color | 100/50/30/50 | ||
| Print B/W Full Color |
10/10/10/10 100/50/30/50 |
||
| Boot Mode | Normal | ||
| U207 | Checking the operation panel keys | - | |
| U209 | Set RTC (Real Time Clock) Date | A4 | |
| U221 | Setting the USB host lock function | Off | |
| U222 | Setting the IC card type | Other | |
| U223 | Operation panel lock | Unlock | |
| U224 | Panel sheet extension | - | |
| U234 | Setting punch destination | Inch/Europe Metric | |
| U237 | Setting finisher stack quantity | 0/0 | |
| U240 | Checking the operation of the finisher | - | |
| U241 | Checking the operation of the switches of the fin- isher | - | |
| U243 | Checking the operation of the DP motors | - | |
| U244 | Checking the DP switches | - | |
| U245 | Checking messages | - | |
| U246 | Setting the finisher | 0/0/0/0/0/0/0/0 | |
| U247 | Setting the paper feed device | - |