Kyocera TASKalfa 255c
Troubleshooting. Jam Codes: 7963 - 9410
*: Refer to figure for paper jam location
| Code | Contents | Conditions | Jam location* |
|---|---|---|---|
| 7963 | Sequence error 6 | The finisher does not deliver the eject-complete command in 15 seconds after the bridge eject sensor is turned off. | G |
| 9001 | DP original conveying jam | DP timing sensor (DPTS) turns off within the speci- fied time since the sensor turns on. | J |
| 9004 | DP original switchback jam | During duplex switchback scanning, the DP regis- tration sensor (DPRS) does not turn on within specified time of the DP timing sensor (DPTS) turning off. | J |
| 9010 | DP open | The DP is opened during original feeding. Sensor in the conveying system is on when the power is turned on or the cover is closed. | - |
| 9011 | DP top cover open | The DP top cover is opened during original feed- ing. | - |
| 9110 | DP paper feed sensor stay jam | The DP paper feed sensor (DPPFS) or DP regis- tration sensor (DPRS) does not turn off within the specified time of the DP timing sensor (DPTS) turning on. | J |
| 9200 | DP registration sensor non arrival jam | The DP registration sensor (DPRS) does not turn on within the specified time of the DP paper feed sensor (DPPFS) turning on. | J |
| 9400 | DP timing sensor non arrival jam | The DP timing sensor (DPTS) does not turn on within the specified time of the DP registration sen- sor (DPRS) turning on (Retry 5 times). | J |
| 9410 | DP timing sensor stay jam | The DP timing sensor (DPTS) does not turned off within the specified time its turning on. | J |