PrintCopy.info service

Kyocera TASKalfa 2551ci

Troubleshooting. Jam Codes: 9001 - 9300

Code Contents Conditions Jam location*
9001 DP original conveying jam DP timing sensor (DPTS) turns off within the speci- fied time since the sensor turns on. G
9002 DP sensor stay jam Sensor in the conveying system is on since original feeding starts. G
9004 DP original switchback jam During duplex switchback scanning, the DP regis- tration sensor (DPRS) does not turn on within specified time of the DP timing sensor (DPTS) turning off. G
9005 No original feed jam 2 DP lift sensor 1 (DPLS1) does not turn on within specified time of the lift plate rising. G
9006 DP switchback jam 3 DP eject sensor (DPES) is not turned on within specified time since original switchback operation starts. G
9007 DP switchback jam 4 DP eject sensor (DPES) is not turned off within specified time since original switchback operation starts. G
9008 No original feed jam 3 DP CIS sensor (DPCS) does not turn on within specified time of the paper feed starting. G
9009 DP original conveying jam 2 Next feed original became the stand-by states of paper feed while reading the image. G
9010 DP open The DP is opened during original feeding. Sensor in the conveying system is on when the power is turned on or the cover is closed. G
9011 DP top cover open The DP top cover is opened during original feed- ing. G
9020 Original skew feed jam DP skew sensor (DPSS) does not turn on within specified time of DP registration sensor (DPRS) turning on. G
9110 DP paper feed sensor stay jam The DP paper feed sensor (DPPFS) or DP regis- tration sensor (DPRS) does not turn off within the specified time of the DP timing sensor (DPTS) turning on. G
9200 DP registration sensor non arrival jam The DP registration sensor (DPRS) does not turn on within the specified time of the DP paper feed sensor (DPPFS) turning on. G
9210 DP registration sensor stay jam DP registration sensor (DPRS) does not turn off within specified time of DP timing sensor (DPTS) turning on. G
9300 DP CIS sensor non arrival jam DP CIS sensor (DPCS) does not turn on within specified time of DP registration sensor (DPFS) turning on. G

*: Refer to figure for paper jam location

Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us