Kyocera TASKalfa 2551ci
Troubleshooting. Jam Codes: 6041 - 9000
| Code | Contents | Conditions | Jam location* |
|---|---|---|---|
| 6041 | DF top cover open | DF top cover is opened during operation (1000- sheet finisher). | - |
| 6101 | DF paper entry sensor non arrival jam | DF paper entry sensor (DFPES) does not turned on even if a specified time has elapsed after the machine eject signal was received (1000-sheet fin- isher). | I |
| 6111 | DF paper entry sensor stay jam | DF paper entry sensor (DFPES) does not turned off within specified time of its turning on (1000- sheet finisher). | J |
| 6301 | DF middle eject sensor non arrival jam | DF middle eject sensor (DFMES) does not turn on within specified time of DF paper entry sensor (DFPES) turning on (1000-sheet finisher). | J |
| 6311 | DF middle eject sensor stay jam | DF middle eject sensor (DFMES) is not turned off within specified time of its turning on (1000-sheet finisher). | J |
| 6401 | DF tray upper surface sen- sor non arrival jam | DF tray upper surface sensor (DFTUSS) does not turn on within specified time of DF middle eject sensor (DFMES) turning on (1000-sheet finisher). | J |
| 6411 | DF tray upper surface sen- sor stay jam | DF tray upper surface sensor (DFTUSS) is not turned off within specified time of its turning on (1000-sheet finisher). | J |
| 6511 | DF eject paper sensor stay jam | DF eject paper sensor (DFMTS) is not turned off since the bundle discharge starts (1000-sheet fin- isher). | J |
| 6811 | DF side registration sensor 1 stay jam | DF side registration sensor 1 (DFSRS1) is not turned off within specified time after driving the DF side registration motor 1 (DFSRM1) (1000-sheet finisher). | J |
| 6911 | DF side registration sensor 2 stay jam | DF side registration sensor 2 (DFSRS2) is not turned off within specified time after driving the DF side registration motor 2 (DFSRM2) (1000-sheet finisher). | J |
| 7001 | DF staple operation error | DF staple sensor (DFSTS) is not turned on within specified time after driving the DF staple motor (DFSTM) (1000-sheet finisher). | J |
| 7100 | CF paper entry sensor non arrival jam | CF paper entry sensor (CFPES) is not turned on even if a specified time has elapsed after the machine eject signal was received. | J |
| 7901 | HP detection error of a mid- dle motor | DF middle sensor (DFMES) is not turned on. | J |
| 7951 | Paper interval error jam | An illegal inter-page or inter-copy interval has occurred (1000-sheet finisher). | J |
| 9000 | No paper feed from DP | DP feed sensor (DPPFS) does not turn on during original feed from DP (Retry 5 times). | G |
*: Refer to figure for paper jam location