Kyocera TASKalfa 180
Maintenance Mode. Item List 3
*Initial setting for executing U020, *1: The item initialized for executing U020, *2: The item initialized for executing U021
| Section | Item No. | Content of maintenance item | Initial setting* |
|---|---|---|---|
| Mode setting | U343 | Switching between duplex/simplex copy mode | Simplex copy*1 |
| U344 | Setting the low-power mode | ENERGY STAR (inch)*1,*2 GEEA (metric)*1,*2 |
|
| U345 | Setting the value for maintenance due indication | 0*1,*2 | |
| Image processing | U402 | Adjusting margins of image printing | 3.0/3.5/4.5*1 |
| U403 | Adjusting margins for scanning an original on the contact glass | 2.0/3.0/2.0/2.0*1 | |
| U404 | Adjusting margins for scanning an original from the DP | 2.0/3.0/2.0/2.0*1 | |
| U407 | Adjusting the leading edge registration for memory image printing | 0.0 | |
| Other | U901 | Checking/clearing copy counts by paper feed locations | - |
| U903 | Checking/clearing the paper jam counts | - | |
| U904 | Checking/clearing the service call counts | - | |
| U905 | Checking counts by optional devices | - | |
| U908 | Checking the total count | - | |
| U910 | Clearing the black ratio data | - | |
| U911 | Checking/clearing copy counts by paper sizes | - | |
| U920 | Checking the accounting counts | ||
| U927 | Clearing the all copy counts and machine life counts (one time only) | - | |
| U928 | Checking the machine life count | - | |
| U931 | Setting the automatic toner install | Off*1 | |
| U941 | Setting the default magnification ratio of the default cassette | 100%*1 | |
| U942 | Setting of amount of slack for feeding from DP | 0/0*1 | |
| U955 | Setting operation panel type | 0/0*1,*2 | |
| U969 | Checking of toner area code | - | |
| U990 | Checking/clearing the time for the exposure lamp to light | - | |
| U991 | Checking the scanner count | - | |
| U993 | Outputting a VTC-PG pattern | - |