Kyocera ECOSYS P8060cdn
Maintenance Mode. Modes List: U241 - U520
| Classification | No. | Name of maintenance mode | Outline |
|---|---|---|---|
| Operation section / Support equipment |
U241 | Finisher switch check | Check the switch operation |
| U245 | Checking the message | Check message | |
| U246 | Finisher adjustment | Set adjustment value of the finisher | |
| U247 | Paper feed operation check | Drive the PF motor and clutch | |
| U249 | Finisher line test | Execute the 4000-sheet finisher operation test | |
| Mode Setting | U250 | Set Maintenance Counter Pre-set | Change the preset value |
| U251 | clearing the maintenance counter | Display and clear/change the maintenance counter value. | |
| U252 | Destination | Set the machine operation and display for each specification of the destination | |
| U253 | Switching the double/single counts | Set the counting method by each color mode | |
| U260 | Switching feed/exit count | Set the count-up timing | |
| U265 | Setting by destination | Set the OEM code | |
| U271 | Setting the page count unit | Set the counting unit of the long size paper | |
| U278 | Delivery date setting | Register delivery date | |
| U284 | Setting the 2-color copy | Switch the mode for 2-color copy function | |
| U285 | Set Service Status Page | Set the print coverage report output | |
| U286 | Optional language setting | Add/delete/change the optional language | |
| U287 | Automatic recovery function | Set whether to make auto recovery function after the error | |
| U323 | Abnormal temperature and humidity notification setting | Switch the display mode of the abnormal temperature and humidity detection | |
| U325 | Paper interval setting | Sets the print interval at high coverage printing | |
| U327 | Cassette heater control setting | Select the cassette heater control setting | |
| U332 | Adjusting the black coverage coefficient | Set the coefficient of the custom size | |
| U339 | Drum heater ON mode setting | Set the drum heater | |
| U340 | Setting the applied mode | Set the memory allocation | |
| U345 | Maintenance due timing display setting | Set the maintenance timing message display | |
| U346 | Selecting Sleep Mode | Set the BAM related sleep mode | |
| Image processing | U464 | ID correction setting | Set the ID correction |
| U465 | ID correction data | Display the light intensity control value after the ID correction | |
| U467 | Color registration correction operation setting | Set the operation of the color registration correction | |
| U468 | Color registration correction data | Display the color registration correction data | |
| U469 | Initial Set 1st Transfer Unit | Set the primary transfer unit | |
| U470 | Setting the JPEG compression rate | Set the JPEG compression ratio | |
| U474 | Checking the LSU cleaning | Set the LSU cleaning operation check and cleaning cycle | |
| U485 | Image process mode setting | Set the image process related items | |
| U486 | Color/BW mode setting | Switch setting of the color/black & white speed | |
| U520 | TDRS setting | Check/refer the information for the TDRS |