Kyocera ECOSYS P6230cdn
Troubleshooting. Abnormal Noise 3
7. Abnormal sound from the lower side than the fuser exit section
Rubbing sound between the bushing and the stop ring of the fuser exit roller due to the smudges / foreign objects adhesion
| Step | Check description | Assumed cause | Measures |
|---|---|---|---|
| 1 | Cleaning and applying the grease | The fuser exit roller, bushing or the stop ring are dirty, or foreign objects are on them. | Clean the fuser exit roller, bushing and the stop ring and apply the lubricant to them. |
| 2 | Replacing the fuser unit | The fuser unit is faulty. | Replace the fuser unit. |
8. Abnormal sound from the lower side than the fuser exit section
Rubbing sound between the bushing and the stop ring of the fuser exit roller due to the smudges / foreign objects adhesion
| Step | Check description | Assumed cause | Measures |
|---|---|---|---|
| 1 | Cleaning and applying the grease | The fuser exit roller, bushing or the stop ring are dirty, or foreign objects are on them. | Clean the fuser exit roller, bushing and the stop ring and apply the lubricant to them. |
| 2 | Replacing the fuser unit | The fuser unit is faulty. | Replace the fuser unit. |
9. Abnormal sound from the upper side of the fuser exit section
Rubbing sound between the fuser exit pulley and the shaft due to the smudges / foreign matter adhesion
| Step | Check description | Assumed cause | Measures |
|---|---|---|---|
| 1 | Cleaning and applying the grease | The pulley or the shaft is dirty, or foreign matter is on them. | Clean the fuser exit pulley and the shaft and apply the lubricant to them. |
| 2 | Replacing the fuser unit | The fuser unit is faulty. | Replace the fuser unit. |
9. Abnormal sound from the fuser section
Smudges / foreign objects adhesion or the interference between the parts in the fuser section
| Step | Check description | Assumed cause | Measures |
|---|---|---|---|
| 1 | Cleaning and applying the grease | The bushing or the gear is dirty or foreign objects are on them. | Clean the bushing and gear of the fuser heat roller and fuser press roller, and apply grease |
| 2 | Cleaning and applying the grease | The shaft is dirty or foreign objects are on it. | Clean the fuser exit pulley and the shaft and apply the lubricant to them. |
| 3 | Cleaning and applying the grease | The gear is dirty or foreign objects are on it. | Clean the fuser drive gear and apply the grease to it. |
| 4 | Applying the grease | The grease is not enough. | Apply the grease to the pressure release cam and the frame. |
| 5 | Replacing the fuser unit | The fuser forwarding guide is bent and contacts the fuser pressure roller. | Replace the fuser unit. |