Kyocera ECOSYS M3540idn
Maintenance Mode. Modes List: U633 - U699
Section | Item No. | Content of maintenance item | Summary |
---|---|---|---|
FAX | U633 | Comm Ctrl 4 | It is whether communication by V.34 is per- mitted, and transmission and reception -- it sets up individually. It is set up whether 3429 Hz in V.34 symbol speed is used. The number of times of reception of a DIS signal is set up. A RTN signal sending-out judging standard (rate of an error line) is set up. |
U634 | Comm Ctrl 5 | The judging standard of TCF is set up. | |
U640 | Comm Time 1 | The detection time at the time of one shot selection of a remote change is set up. The detection time at the time of the contin- uous selection of a remote change is set up. |
|
U641 | Comm Time 2 | The timeout time at the time of FAX com- munication is set up. | |
U650 | Modem 1 | G3 cable equalizer is set up. A modem disregard level is set up. |
|
U651 | Modem 2 | A modem outgoing level is set up. | |
U660 | Set Calls | A setup relevant to NCU (network control unit) is carried out. | |
U670 | Output List | The list of the data relevant to facsimile communication is outputted. | |
U695 | Custom FAX Func | FAX package transmission is set up. The output priority at the time of receiving A5 size is set up. |
|
U699 | Set Soft SW | A setup of the softswitch on a FAX control circuit board is set up individually. |