Kyocera ECOSYS M3540dn
Maintenance Mode. Modes List: U201 - U520
Section | Item No. | Content of maintenance item | Summary |
---|---|---|---|
Operation panel and support equipment |
U201 | Init Touch Panel (HyPAS only) | It adjusts, when the detection position of the touch panel has shifted. |
U203 | Chk DP Ope | Each simulation is operated with DP simple substance. | |
U207 | Chk Panel Key | An operation key is checked. | |
U222 | Set IC Card Type | Sets the type of IC card. | |
Mode set-ting | U250 | Mnt Cnt Pre-set | The preset value (number of sheets) of a maintenance cycle is set up. |
U251 | Clr Mnt Cnt | A maintenance counter are displayed and the data are changed. | |
U252 | Set Dest | The destination is set up. | |
U253 | Sel D/S Count | The copy count methods (double count), such as a total counter, are set up. | |
U260 | Set Count Mode | The timing (feeding or ejection) which a total count etc. count is changed. | |
U265 | Set Model Dest | The consecutive numbers of the OEM are set up. | |
U285 | Set Svc Sts Page | A coverage report output (permission or failure) is channged. | |
U332 | Adj Calc Rate | The coefficient of the fixed form external application paper to A4 (or 11x8.5) paper is set up. | |
U339 | Chk Drum Heater | The display existence of a drum heater setup of a system menu is changed. | |
U345 | Set Mnt Time Disp | The number of sheets of a check close dis- play is set up. | |
U346 | Slct Sleep Mode | A BAM conformity country is set up. | |
Image processing | U402 | Adjust Margin | The space of a leading edge, AC side, and a trailing edge is adjusted. |
U403 | Scan Margin Tbl | The margin of reading data is adjusted by picture reading by a scanner. | |
U404 | Scan Margin DP | The margin of reading data is adjusted by picture reading by DP | |
U411 | Auto Adj Scn | A scanner and DP are adjusted automati- cally. | |
U425 | Set Target | The target value of an adjustment original is set up. | |
Network | U520 | Set TDRS | Perform TDRS settings and information views. |