Konica-Minolta bizhub C658
Firmware. USB memory. Entering the machine type information
• When MFP board is replaced, it is necessary to enter the machine type information.
• Refer to the following procedures to enter the machine type information.
Procedure
- Insert the USB memory to the USB port.
- Turn the main power switch ON while pressing the Stop key.
- Touch [Machine Type Select].
- Enter [Machine] and [Type] information according to the following table. Then touch [Fix].
First four digits of the serial number A79J A79K A79M [Machine] 9 9 9 [Type] 6 *1
7 *28 *1
9 *2D
• *1: Europe only
• *2: Except for Europe - Touch [OK], and turn OFF the main power switch.