Konica-Minolta bizhub C650
Service Mode. Function tree 3
✽ The function tree is shown to comply with the format displayed on the screen.
*1: Settings are available only when the optional fax kit (FK-502) is mounted.
*2: It will be displayed only when the optional fax multi line (ML-501) is mounted.
*3: It will be displayed only when the optional finisher (FS-517/608 or FS-519) is mounted.
*4: It will be displayed only when the optional finisher (FS-519) is mounted.
*5: It will be displayed only when the optional finisher (FS-517/608) is mounted.
*6: It will be displayed only when the optional finisher (FS-608) is mounted.
*7: It will be displayed only when the [Internet ISW Set] is set to “ON.”
*8: It will be displayed only when the optional post inserter (PI-503) is mounted.
*9: It will be displayed only when the optional job separator (JS-504) is mounted.
| Service Mode | ||
|---|---|---|
| System 2 | LCT Paper Size Setting | |
| Line Mag Setting | ||
| Data Capture | ||
| Split Line Detect. Setting | ||
| Stamp | ||
| Network Fax Settings | ||
| Counter | Life | |
| Jam | ||
| Service Call Counter | ||
| Warning | ||
| Maintenance | ||
| Service Total | ||
| Counter Of Each Mode | ||
| Service Call History (Data) | ||
| ADF Paper Pages | ||
| Paper Jam History | ||
| Fax Connection Error | ||
| Split Line Counter | ||
| Parts Counter (Fixed) | ||
| Counter Reset | ||
| List Output | Machine Management List | |
| Adjustments List | ||
| Parameter List | ||
| Service Parameter | ||
| Protocol Trace | Last | |
| Error | ||
| Fax Setting List | ||
| Fax Analysis List | ||
| State Confirmation | Sensor Check | |
| Table Number | ||
| Level History1 | ||
| Level History2 | ||
| Temp. & Humidity | ||
| CCD Check | ||