Konica-Minolta bizhub C650
Service Mode. Function tree 2
✽ The function tree is shown to comply with the format displayed on the screen.
*1: Settings are available only when the optional fax kit (FK-502) is mounted.
*2: It will be displayed only when the optional fax multi line (ML-501) is mounted.
*3: It will be displayed only when the optional finisher (FS-517/608 or FS-519) is mounted.
*4: It will be displayed only when the optional finisher (FS-519) is mounted.
*5: It will be displayed only when the optional finisher (FS-517/608) is mounted.
*6: It will be displayed only when the optional finisher (FS-608) is mounted.
*7: It will be displayed only when the [Internet ISW Set] is set to “ON.”
*8: It will be displayed only when the optional post inserter (PI-503) is mounted.
*9: It will be displayed only when the optional job separator (JS-504) is mounted.
Service Mode | ||
---|---|---|
Imaging Process Adjustment | Gradation Adjust | |
Transfer Belt | Cleaning Bias | |
Auto Cleaning | ||
D Max Density | ||
TCR Level Setting | ||
Background Voltage Margin | ||
Transfer Output Fine Adjustment | Primary transfer adj. | |
Secondary transfer adj. | ||
Stabilizer | Stabilization Only | |
Initialize+Image Stabilization | ||
Thick Paper Density Adjustment | Thick 1,1+ | |
Thick 2,3,4 | ||
Paper separation adjustment | ||
TCR Toner Supply | ||
Monochrome Density Adjustment | ||
Dev. Bias Choice | ||
CS Remote Care | ||
System 1 | Marketing Area | |
Tel/Fax Number | ||
Serial Number | ||
No Sleep | ||
Foolscap Size Setting | ||
Original Size Detection | ||
Install Date | ||
Initialization | Data Clear | |
System Error Clear | ||
Charging CH cleaning | Cleaning | |
Self-Cleaning | ||
Trouble Isolation | ||
Post card transfer table | ||
Change Warm Up Time | ||
Machine State LED Setting | ||
System 2 | HDD | |
Image Controller Setting | ||
Option Board Status | ||
Consumable Life Reminder | ||
Unit Change | ||
Software Switch Setting | ||
Scan Calibration | ||
LCC size setting |