Konica-Minolta bizhub C650
Service Mode. Function tree 1
✽ The function tree is shown to comply with the format displayed on the screen.
*1: Settings are available only when the optional fax kit (FK-502) is mounted.
*2: It will be displayed only when the optional fax multi line (ML-501) is mounted.
*3: It will be displayed only when the optional finisher (FS-517/608 or FS-519) is mounted.
*4: It will be displayed only when the optional finisher (FS-519) is mounted.
*5: It will be displayed only when the optional finisher (FS-517/608) is mounted.
*6: It will be displayed only when the optional finisher (FS-608) is mounted.
*7: It will be displayed only when the [Internet ISW Set] is set to “ON.”
*8: It will be displayed only when the optional post inserter (PI-503) is mounted.
*9: It will be displayed only when the optional job separator (JS-504) is mounted.
Service Mode | ||
---|---|---|
Machine | Color alignment Adjustment | |
Fusing Temperature | ||
Fusing Transport Speed | ||
Org. Size Detecting Sensor Adj. | ||
Printer Area | Leading Edge Adjustment | |
Centering | ||
Leading Edge Adj. (Duplex Side 2) | ||
Centering (Duplex 2nd Side) | ||
Paper Feed Direction Adj. | ||
Scan Area | Image Position: Leading Edge | |
Image Position: Side Edge | ||
Cross Direction Adjustment | ||
Feed Direction Adjustment | ||
Printer Resist Loop | ||
Color Registration Adjustment | Cyan | |
Magenta | ||
Yellow | ||
Skew adjustment | Skew adjustment | |
Skew adjustment reset | ||
LD adjustment | LD delay adjust. | |
LD lightness balance adjust. | ||
Manual Bypass Tray Adjustment | ||
Lead Edge Erase Adjustment | ||
Thick Paper Mode | ||
Split Line Prior Detection | ||
Firmware Version |