Konica-Minolta bizhub C35P
Troubleshooting. Jam 09. Misfeed at duplex media feed section
Detection timing
Type | Description |
---|---|
Detection of misfeed at duplex media feed section | • The media does not unblock the registration sensor (PS5) even after the lapse of a given period of time after the media feed sequence has been started at the duplex. |
Relevant electrical parts
Registration sensor (PS5)
Duplex conveyance roller clutch (CL13)
Printer control board (PRCB)
Main motor (M2)
Action
Step | Action | Control signal | Location |
---|---|---|---|
1 | Initial check items. | ||
2 | Check the connector between M2-PRCB PJ11 for proper connection and correct as necessary. | ||
3 | Check the M2 connector for proper drive coupling and correct as necessary. | ||
4 | Check the connector between PS5-PRCB PJ23 for proper connection and correct as necessary. | ||
5 | Check the connector between CL13-relay CN20-PRCB PJ15 for proper connection and correct as necessary. | ||
6 | PS5 sensor check | PRCB PJ23-3 (ON) | K-15 |
7 | CL13 operation check | PRCB PJ15-5 (REM) | C-7 |
8 | M2 operation check | PRCB PJ11-10 to 13 | C-15 |
9 | Change PRCB. |