Konica-Minolta bizhub C353P
Service Mode. Function tree 1
NOTE
• Some of these functions can be set or checked only with the jig software. For details, see the function tree of the jig software.
*1: It will be displayed only when the [Internet ISW Set] is set to “ON.”
*2: Unavailable when Data Capture is prohibited on the utility mode
*3: It will be displayed only when the optional finisher is mounted.
Service Mode | ||
---|---|---|
System Settings | Destination | |
Enter Serial No. | ||
Initialize | Data Clear | |
SystemError Clear | ||
Foolscap Size | ||
Don’t go to Sleep | ||
Image Controller | Select Controller | |
Controller Mode | ||
Unit Replacement | Toner Cartridge | |
Waste Toner Box | ||
Imaging Unit | ||
Punch Scrap Box | ||
LCT Size Setting | ||
Data Capture *2 | ||
SoftwareSWSetting | ||
Enter Setup Date | ||
Comm. System | CommSystemSetting | |
CommSystemStatus | ||
Option Setting | HDD Installation | |
Maintenance Ctr | Max Allowance | |
Clear Counter | ||
Count Start Data | ||
IU Yield Setting | ||
Change WarmupTime | ||
StatusLED Setting | Paper Remaining | |
TonerNearEmpty | ||
AuthDeviceSetting | Auth. Mode | |
Shooting Timeout |