Konica-Minolta bizhub C353
Service Mode. Enhanced Security
Enhanced Security function setting procedure
Procedure
- Call the Service Mode to the screen.
- Press the following keys in this order.
Stop → 0→ Clear - Enhanced Security menu will appear.
Exiting
• Touch the [Exit].
CE Password
Functions
• To set and change the CE password.
Use
• Use to change the CE password.
Setting/ Procedure
- Enter the CE password (8 digits) on the on-screen keyboard.
- The initial setting is “92729272.”
Current Password : Enter the currently using CE password.
New Password : Enter the new CE password.
Re-Input Password : Enter the new CE password again.
NOTE
• When the following setting leads to the Password Rules [ON], the password with the same letters as well as the password which is same as the previous one cannot be changed. [Administrator Setting] ¨ [Security Setting]
• NEVER forget the CE password. When forgetting the CE password, call responsible person of KONICA MINOLTA.
CE Authentication
Functions
• To determine whether or not to authenticate CE password as entering Service Mode.
Use
• Use when authenticating CE password as entering Service Mode.
Setting/ Procedure
• The default setting is OFF.
Administrator Password
Functions
• To set and change the administrator password.
Use
- Use to change the administrator password.
- Use this function when the administrator forget the administrator password because a new password can be set without entering the current administrator password with this.
Setting/ Procedure
- Enter the administrator password (8 digits) on the on-screen keyboard.
- The initial setting is “12345678.”
New Password : Enter the new administrator password.
Re-Input Password : Enter the new administrator password again.
NOTE
• When the following setting leads to the Password Rules [ON], the password with the same letters, the password which is same as the previous one and the password of less than eight digits cannot be changed. [Administrator Setting] → [Security Setting]