Konica-Minolta bizhub C352P

Procedure

1. Call the Service Mode to the screen.
2. Press the following keys in this order.
   Stop → 0→ Clear
3. Enhanced security menu will appear.

Exiting

• Click the “Exit”.

CE Password

Functions

• To set and change the CE password.

Use

• Use to change the CE password.

Setting/ Procedure

• Enter the CE password (8 digits) on the on-screen keyboard.
• The initial setting is “92729272.”
Current Password : Enter the currently using CE password.
New Password : Enter the new CE password.
Re-Input Password : Enter the new CE password again.
NOTE
• When the following setting leads to the Password Rules [Enable], the password with the same letters as well as the password which is same as the previous one cannot be changed.
[Admin. Setting] → [Security Setting]
• NEVER forget the CE password. When forgetting the CE password, call responsible person of KONICA MINOLTA.

Administrator Password

Functions

• To set and change the administrator password.

Use

• Use to change the administrator password.

Setting/ Procedure

• Enter the administrator password (8 digits) on the on-screen keyboard.
• The initial setting is “12345678.”
New Password : Enter the new administrator password.
Re-Input Password : Enter the new administrator password again.
NOTE
• When the following setting leads to the Password Rules [Enable], the password with the same letters, the password which is same as the previous one and the password of less than eight digits cannot be changed.
[Admin.Setting] → [Security Setting]

CE Authentication

• It will not be displayed when the following settings are set to “ON” or “Enable”.
[Admin. Setting] → [Security Setting] → [Enhanced Security] or [Password Rules].

Functions

• To determine whether or not to authenticate CE (service) password as entering Service Mode.

Use

• Use when authenticating CE (service) password as entering Service Mode.

Setting/ Procedure

• The default setting is OFF.
NOTE
• For setting the following setting to “ON” or “Enable”, set the CE Authentication to “ON” and change the initial CE (service) password beforehand.
[Admin. Setting] → [Security Setting] → [Enhanced Security] or [Password Rules]