Konica-Minolta bizhub C350
Troubleshooting. Jam 03. 2nd Drawer take-up, Vertical Transport, Manual Bypass take-up
Detection timing
Type | Description |
---|---|
2nd Drawer takeup, Vertical Transport misfeed detection | The leading edge of the paper does not block the Tray2 Vertical Transport Sensor (PC108) even after the lapse of a given period of time after the Tray2 Paper Feed Motor has been energized. |
The Synchronizing Roller Sensor (PC28) is not blocked even after the lapse of a given period of time after the paper has blocked the Tray2 Vertical Transport Sensor (PC108). | |
Misfeed detected at Bypass | The leading edge of the paper does not block the Tray2 Vertical Transport Sensor (PC108) even after the lapse of a given period of time after the Bypass Paper Feed Clutch has been energized. |
Paper left at Tray2 or Bypass | Tray2 Vertical Transport Sensor (PC2) is blocked when the Power Switch is turned ON, a door or cover is opened and closed, or a misfeed or malfunction is reset. |
Paper left at Tray2 | Tray2 Paper Take-Up Sensor (PC107) is blocked when the Power Switch is turned ON, a door or cover is opened and closed, or a misfeed or malfunction is reset. |
Misfeed detected as a result of delayed deactivation of sensor | The Tray2 Vertical Transport Sensor (PC108) is not unblocked even after the lapse of a given period of time after it has been blocked by the paper. |
2nd Drawer take-up, Vertical Transport
Relevant electrical parts
Tray2 Paper Take-Up Sensor (PC107)
Tray2 Vertical Transport Sensor (PC108)
Synchronizing Roller Sensor (PC28)
Tray2 Paper Feed Motor (M102)
Tray2 Board (PWB-Z)
Action
Step | Action | Control signal | Location |
---|---|---|---|
1 | Initial check items. | ||
2 | PC107 I/O check, Sensor check | PWB-Z PJ6Z-8 (ON) | 2-X |
3 | PC108 I/O check, Sensor check | PWB-Z PJ6Z-11 (ON) | 2-Y |
4 | PC28 I/O check, Sensor check | PWB-MC PJ12MC-6 (ON) | 2-R |
5 | M102 operation check | PWB-Z PJ5Z-1 ~ 4 | 2-V |
6 | Change PWB-Z |
Manual Bypass take-up
Relevant electrical parts
Tray2 Vertical Transport Sensor (PC108)
Bypass Paper Feed Clutch (CL101)
Tray2 Board (PWB-Z)
Action
Step | Action | Control signal | Location |
---|---|---|---|
1 | Initial check items. | ||
2 | PC108 I/O check, Sensor check | PWB-Z PJ6Z-11 (ON) | 2-Y |
3 | CL101 operation check | PWB-Z PJ7Z-14B (ON) | 2-C |
4 | Change PWB-Z |