Konica-Minolta bizhub C35
Troubleshooting. Jam 05. Misfeed at tray 2 paper feed section
Detection timing
Type | Description |
---|---|
Detection of misfeed at tray 2 paper feed section | • The paper does not unblock the registration sensor (PS5) even after the lapse of a given period of time after the tray2 media feed clutch (CL1) is turned ON. |
Relevant electrical parts
Registration sensor (PS5)
Tray2 media feed clutch (CL1)
Printer control board (PRCB)
Main motor (M2)
Action
Step | Action | Control signal | Location |
---|---|---|---|
1 | Initial check items. | ||
2 | Check the connector between M2-PRCB PJ6 for proper connection and correct as necessary. | ||
3 | Check the M2 connector for proper drive coupling and correct as necessary. | ||
4 | Check the connector between PS5-PRCB PJ27 for proper connection and correct as necessary. | ||
5 | Check the connector between CL1-PRCB PJ11 for proper connection and correct as necessary. | ||
6 | PS5 sensor check | PRCB PJ27-7 (ON) | E-15 |
7 | CL1 operation check | PRCB PJ11-2 (REM) | J-15 |
8 | M2 operation check | PRCB PJ6-3 to 6 | C-15 |
9 | Change PRCB. |